Invoice canvas

Which tissue can embroider a cross? You can embroider a cross on either thin or thick tissue, but it is important to remember, what, regardless of the size of the stitch thread, which embroider, the foundation is always a little peeps through embroidery, and that this did not happen should choose the fabric for embroidery similar in color to the color of the thread, to be used during operation.

Cross Stitch on fabric with poorly structured manner, ie which does not clearly distinguish between the weft yarn and equity, It uses a special fabric kanvovaya "Grandma flap", or overhead canvas. This canvas with regular and rare cross-weave yarn, which tack to any tissue, which will embroidery, and at the end of the work the strings gently pulled a canvas for one. As a result, the fabric is nice and smooth design.

08With invoice canvas can easily be performed on any product image, such as t-shirt, bag, jeans, etc.. Special Invoice outline is very starched, so it may be too stiff. Besides a thread canvas much thicker, than a simple filament fabrics for embroidery. Sometimes the bill outline can have blue markings every thread 10 cell, most frequent density - 8,5, 10, 14 and 18 cells 2,5 cm, or 1 inch.

Getting Started, must be considered, a piece of canvas that the consignment should be somewhat larger, than the drawing area or tissue, where it will be executed. Cut the desired piece of canvas consignment, you need to decide, on any part of the product will be embroidery. By attaching to the fabric of the fabric on the front side, on the wrong tack may be substrate, to drawing not break and gets a smooth. The substrate can be any rigid, but not very dense fabric, which will help to avoid the contraction of threads products. After cutting out the desired fragment consignment canvas, its threads may become distorted, this can easily be corrected, if you pull the strands apart and align their direction.

Attach the fabric of the invoice to the product in several ways. The first method: Align the centers of the invoice canvas and fabric, and then baste the future of embroidery canvas. Second method: indicate on the product and on the invoice outline the horizontal and vertical axis of the future embroidery, then center the intersection of the axes in both tissues and tack canvas. Basting seams is best to lay the center of the canvas to its edges, it is better to sit on the cloth and not break. Some make the grid at smetyvanii, Other - Cross, that is diagonally opposite corners connected stitches. If the substrate is used for embroidery, then it is best to tack to the fabric together with the canvas.

Embroidery on garments and other things, especially made of jersey, not recommended to use the hoop, because they can strongly distort the fabric and ruin the product. When using the special waybill canvas it is recommended to embroider on their hands.

Needles for embroidery using starched canvas also need special. It is best suited needle with a sharp tip, because the clogged holes starch consignment canvas not too convenient punching blunt tip, and the embroidery fabric is also easier to pierce a simple sewing needle.

Embroidery thread to perform the pattern on the fabric of the canvas with the help of the invoice usually take floss «Ancor» or «DMC». Number of yarns additions will depend on the color of the fabric and thread themselves, how big the difference between them, stitch density and fabric bases. If the colors of thread and fabric are too different, You can increase the number of additions. Overhead Canvas 14-18 cells per 2,5 see better use 2-3 adding strands of floss, on the canvas with 8,5-10 cells per 2,5 See, you can borrow up to 6 additions.

Finished embroidery, canvas must be removed. Since it is very hard, then without pretreatment thread to pull it almost impossible. The easiest way to facilitate the removal of the invoice canvas, moistening it with water from spray. However, it does not need too much watering embroidery, otherwise the outline will not be well removed. Soaked fabric, you must first remove all baster, and then pull the thread invoice canvas. If a sufficiently large embroidered picture, You can not pull the threads of the canvas, just cut them very close to the deadline Crosses, not to leave extra fringe. Or you can cut the threads in the middle of the canvas picture, then they will be easier to pull both edges, and from the middle of the pattern.

Starched canvas you can moisten slightly, easier to thread separated from each other. At the end of, to remove the threads of the canvas from the crosses, You can use cosmetic pincers. However, in that case the tension can stitch pattern loose and will not be sufficiently dense. Then you can delete only those threads canvas, where no crosses, and the rest cut very close to the stitches, So, to the canvas was not visible completely. In this way, the crosses remain flat, and embroidery - dense.
history of weaving elastic bands

The history of weaving elastic bands


Publication author

offline 7 days

ILya Hodiy


Configure and support

Comments: 137Public: 409Registration: 15-12-2012

Leave a reply

Войти с помощью: 

Your email address will not be published. Required fields are marked *


Write us a letter

You have any questions or suggestions? Keep in touch. We will try to make the site better and easier.

2012-2014 © - All about cross stitch

All diagrams are provided for informational purposes only for job evaluations. They are not an exact copy of the original scheme. Schemes are not subject to commercial diffusion, After downloading to your PC and familiarize, recommend that you remove them.

Design: - Схемы вышивок на любой вкус
Войти с помощью: 
Войти с помощью: 
Password generation

Log in with your credentials


Forgot your details?

Create Account